Turning On Caavo for the First Time

Avatar
by Gagan
Follow

This article is an overview of the steps you'll go through when you set up your Caavo.  

Connect to the Internet

The first step is to connect Caavo to the internet. We recommend that you use the included Ethernet cable for the best experience, but Caavo will connect to a wireless network if Ethernet isn't available.

Read more about connecting to the internet > 

 

Configure Your Screen

Next, you will make sure Caavo is calibrated to fit your screen properly. You'll do this by adjusting an image presented on the screen using the up and down buttons on the directional pad on your Caavo remote. You'll want to adjust the image so that the arrows precisely touch the edge of your screen, as in the screenshot below:

Screen_Adjust_-_With_Remote.jpg

You can also change this later if you find that the Caavo interface is too large or too small. You can find instructions on how to do that here.

Read more about configuring your screen >

 

Updating Caavo

Caavo will check for updates to ensure that you have the latest available software. All of this will happen automatically, so you'll just need to sit back and wait for any updates to finish. This could take up to 10 minutes, so please be patient!

Read more about updating Caavo >

 

Home Entertainment System Setup

setup_5_open_closed_cabinet.png

Caavo needs to know how your home entertainment system is set up in order to properly control all of your devices. You'll be asked where your devices are placed, whether you have an AVR or soundbar, etc. Caavo needs to know whether your devices are in an open or closed cabinet because it needs line of sight in order to use infrared controls.

Read more about how your system is set up >

 

Connecting Source Devices

If you haven't already, the next step is to connect all of the source devices that you want to use with Caavo. There are 8 HDMI ports along the back of Caavo.

Please ensure that you have the remotes for each of your source devices, as you may need to use the original remote to configure the source device for use with Caavo. You'll also need to ensure that each device is turned on and not in standby mode.

Read more about connecting source devices >

 

Configuring Controls

setup_14_identification_complete.png

The next step will be to ensure that Caavo can control each of the devices connected to it. Caavo comes prepared to automatically control many sources devices, but for some devices you'll be prompted to teach Caavo how to control it. The process is very quick and simple, and you'll be guided through each step with on-screen instructions.

Read more about configuring controls > 

 

Logging In

Setup___unlinked_device___setup_2.png

The last step in the setup process is to sign in to (or create) your Caavo account. Here you will be asked to sign in to the apps and streaming services that you want to use with Caavo. You'll need your credentials for all of the apps that you use.

Signing in to your accounts will make it possible for Caavo to do things like display your watchlist on apps like Netflix and Hulu, as well as automatically launch the next episode of a series that you're watching.

Read more about signing into you Caavo account >

Comments

0 comments
Please sign in to leave a comment.