How to restart Caavo?

If you'd like to restart your Caavo, simply navigate to Settings > Restart, and confirm that you'd like to restart your unit. Your display will momentarily go dark, and will return within a couple of minutes.

Restart_Caavo.png

Was this article helpful?
0 out of 0 found this helpful

Related articles

  • Caavo keeps switching to another input

    Caavo has a feature that allows it to switch to a different device automatically when activity on that device is detected.  (e.g. pressin...

  • Factory Reset

    Factory Reset puts the Caavo back into a pristine state where it is ready to go through the setup process.  The process erases all config...

  • How to access Caavo's Recovery Mode

    To access Caavo's Recovery Mode and downgrade back to the last known working firmware, perform the following steps: With the power cord ...

  • How to recover my Caavo from Bad state?

    If your Caavo goes into a bad state, becomes unresponsive, or doesn't turn on properly, try pulling the power to restart.  If that doesn'...

  • How to restart Caavo?

    If you'd like to restart your Caavo, simply navigate to Settings > Restart, and confirm that you'd like to restart your unit. Your dis...

  • How to switch Caavo accounts?

    To switch the Caavo account linked with your Caavo, you will need to factory reset it first. This will not delete your current account, o...

  • My TV powers on by itself

    Caavo has a setting that will allow other devices to turn it on.  To turn this off for all devices, go to Settings> General> Power ...

  • What Is The Feedback Tool And How Do I Use It?

    Caavo is dedicated to providing you the first-in-class customer support. We made it easy for you to submit a question, concern or comment...

  • What to do if Caavo does not connect to the internet

    Caavo may display a message that a network connection has been lost or is no longer available, or you may try to issue a voice command an...

  • What to do if Caavo doesn't power on

    If your Caavo isn't powering on, please try the following: Make sure power cord is pushed all the way in. This includes both the end tha...