How to access Caavo's Recovery Mode

by Andy

To access Caavo's Recovery Mode and downgrade back to the last known working firmware, perform the following steps:

  1. With the power cord plugged into Caavo; unplug the cord and immediately plug it back in.
  2. Wait 7 seconds.
  3. Perform this same step for a total of 6 times.
  4. After the 6th time, leave the plug connected to Caavo.
  5. Wait approximately 10-15 minutes for Caavo to install and recover to the last known working firmware. During this time Caavo will not output any Audio or Video and will appear to be off. Do NOT unplug the power cord during this time! The Caavo logo should appear when recovery is successful.


Please sign in to leave a comment.