|
STEP 1 - Create Your Account If you’ve already created your Caavo Account, then skip this step and give yourself a pat on the back! If you haven’t already created your Caavo Account online, go to https://setup.caavo.com and create one. Be sure to use an email address that you will always have access to (i.e. maybe don't use your work email in case you change jobs). You will be asked to choose a service plan that will enable all the great features of control center. |
|
|
STEP 2 - Put Batteries in the Remote Unpack your remote, and put in the batteries (we also packed those) by sliding the back cover off. |
|
|
STEP 3 - Disconnect Your Source Devices If you have an AVR or Sound Bar connected to your TV via HDMI, leave it connected on both ends. Then, disconnect all your HDMI source devices from your AVR/Sound Bar. You will connect Control Center to your AVR/ Sound Bar in Step 4. OR If you do not have an AVR/Sound Bar, or your AVR/Sound Bar is connected via RCA or optical, disconnect all your HDMI source devices from your TV. You will connect Control Center directly to your TV in Step 4. |
|
|
STEP 4 - Connect Control Center to your TV or AVR Connect an HDMI cable between the Control Center OUT port and one of the inputs on the TV (non ARC) or AVR/Sound Bar you disconnected your source devices from in Step 3. Remember which input you used - this will help you in Step 6. |
  |
|
STEP 5 - Connect your Source Devices to Control Center Connect all your source devices to Control Center using any of the 4 numbered HDMI ports. |
 |
|
STEP 6 - Power, Network, and TV On! Connect the Control Center power cord to a wall outlet. Connect an Ethernet cable from Control Center to your router for best results. If a wired ethernet connection is unavailable, WiFi can be setup later. Turn on your TV with your TV’s remote (and AVR/Sound Bar too). Follow the on-screen instructions to complete your setup experience. During setup, you will be instructed how to use the included IR accessories (if needed) |
 |
